CHECK VALVE | Energo Sistem https://energo-sistem.com/en/ Gas - energija budućnosti Tue, 13 Mar 2018 00:38:24 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 Check valve TYPE: 705 https://energo-sistem.com/en/project/check-valve-type-705/ https://energo-sistem.com/en/project/check-valve-type-705/#respond Tue, 13 Mar 2018 00:25:50 +0000 https://energo-sistem.com/project/check-valve-type-705/

Check valve

TYPE 705

Type: 705 It is used on installations where it is necessary to prevent the flow of fluid in the direction opposite to the permitted.

Dimension: DN25 ÷ DN100
NPS 1“ ÷ NPS 4“
Operating pressure: max. 50 bar
Pressure class: PN16/25/40
CLASS150/300

]]> https://energo-sistem.com/en/project/check-valve-type-705/feed/ 0 Check valve TYPE: 710 https://energo-sistem.com/en/project/check-valve-type-710/ https://energo-sistem.com/en/project/check-valve-type-710/#respond Tue, 13 Mar 2018 00:27:40 +0000 https://energo-sistem.com/project/check-valve-type-710/

Check valve

TYPE: 710

Check valves produced in Series 700 are installed between standard flanges in gas installations. Presence of this elemnt asures media flow in only one direction. Commonly used, check valves are placed in front of gas pressure regulator in gas regulating stations. Also it is applicable for any kind of application where flow in opposite direction should be prevented.
Series 700 Check valves can be used for natural gas, LPG, propane-butane, air water, and any non-corrosive fluid.
Installation of Check valves, Series 700, is intended for above ground installations.

Dimension: DN15 ÷ DN500

NPS 1/2“ ÷ NPS 20“
Operating pressure: max. 50 bar
Pressure class: PN16/63

CLASS150/300

]]> https://energo-sistem.com/en/project/check-valve-type-710/feed/ 0 Check valve TYPE: 720 https://energo-sistem.com/en/project/check-valve-type-720/ https://energo-sistem.com/en/project/check-valve-type-720/#respond Tue, 13 Mar 2018 00:29:02 +0000 https://energo-sistem.com/project/check-valve-type-720/

Check valve

TYPE: 720

Check valves produced in Series 700 are installed between standard flanges in gas installations. Presence of this elemnt asures media flow in only one direction. Commonly used, check valves are placed in front of gas pressure regulator in gas regulating stations. Also it is applicable for any kind of application where flow in opposite direction should be prevented.
Series 700 Check valves can be used for natural gas, LPG, propane-butane, air water, and any non-corrosive fluid.
Installation of Check valves, Series 700, is intended for above ground installations.

Dimension: DN15 ÷ DN500

NPS 1/2“ ÷ NPS 20“
Operating pressure: max. 50 bar
Pressure class: PN16/63

CLASS150/300

]]> https://energo-sistem.com/en/project/check-valve-type-720/feed/ 0 Check valve TYPE: 730 https://energo-sistem.com/en/project/check-valve-type-730/ https://energo-sistem.com/en/project/check-valve-type-730/#respond Tue, 13 Mar 2018 00:30:16 +0000 https://energo-sistem.com/project/check-valve-type-730/

Check valve

TYPE: 730

Check valves produced in Series 700 are installed between standard flanges in gas installations. Presence of this elemnt asures media flow in only one direction. Commonly used, check valves are placed in front of gas pressure regulator in gas regulating stations. Also it is applicable for any kind of application where flow in opposite direction should be prevented.
Series 700 Check valves can be used for natural gas, LPG, propane-butane, air water, and any non-corrosive fluid.
Installation of Check valves, Series 700, is intended for above ground installations.

Dimension: DN15 ÷ DN500

NPS 1/2“ ÷ NPS 20“
Operating pressure: max. 50 bar
Pressure class: PN16/63

CLASS150/300

]]> https://energo-sistem.com/en/project/check-valve-type-730/feed/ 0 Check valve TYPE: 740 https://energo-sistem.com/en/project/check-valve-type-740/ https://energo-sistem.com/en/project/check-valve-type-740/#respond Tue, 13 Mar 2018 00:36:56 +0000 https://energo-sistem.com/project/check-valve-type-740/

Check valve

TYPE: 740

Check valves produced in Series 700 are installed between standard flanges in gas installations. Presence of this elemnt asures media flow in only one direction. Commonly used, check valves are placed in front of gas pressure regulator in gas regulating stations. Also it is applicable for any kind of application where flow in opposite direction should be prevented.
Series 700 Check valves can be used for natural gas, LPG, propane-butane, air water, and any non-corrosive fluid.
Installation of Check valves, Series 700, is intended for above ground installations.

Dimenzija priključka: DN25 ÷ DN150
NPS 1“ ÷ NPS 6“
Radni pritisak: max. 100 bar
Klasa pritiska: PN63/100

CLASS300/600

]]> https://energo-sistem.com/en/project/check-valve-type-740/feed/ 0 Combined check valve TIP: 750 https://energo-sistem.com/en/project/combined-check-valve-tip-750/ https://energo-sistem.com/en/project/combined-check-valve-tip-750/#respond Tue, 13 Mar 2018 00:38:24 +0000 https://energo-sistem.com/project/combined-check-valve-tip-750/

Combined checkvalve

TYPE 750

Combined check valve type: 750 has a dual function. It can be used as a shut-off valve (interrupts the flow of fluid through the pipeline) and as check valve (prevents the flow of fluid in the opposite direction from the allowed).

Dimension: DN25 ÷ DN150
NPS 1“ ÷ NPS 6“
Pressure class: PN16/25/40
CLASS150
]]> https://energo-sistem.com/en/project/combined-check-valve-tip-750/feed/ 0